Transparent plastic cans on its quality and safety

 First, the quality of

1, such as the forming machine for automatic stripping, when the product will be blown off, dip into the oil and produce bad products.

2, with the use of mechanical hand conveyor belt, packaging staff can be more attention to the quality of clearance, not because of the product and the distraction or is too close to the injection molding machine, too hot and affect the work.

3, such as people take out the product, one may hand scratching the product, two may hand not clean and dirty products.

4, personnel from the time is not fixed, will cause the product to shrink, variant (tube if overdone, the need to re injection caused by the waste of raw materials, the raw material prices), mechanical hand out time is fixed, to ensure product quality.

  Two, safety

1, the use of mechanical hand no longer have the risk of accidental injury employees.

2, do not need to use the hand into the mold to take products, to avoid the security risks caused by.

3, less contact with the product, to avoid overheating caused by products and staff burns.

4, mechanical hand computer with mold protection, mold products without shedding will automatically alarm, will not damage the mold. Injection manipulator.

The process of injection bottle preform blowing is divided into two parts:

A, preheat preforms through the high temperature lamp irradiation, the body part of the heating bottle softening, in order to keep the bottle shape, bottle preform mouth is not heated, so need cooling device for cooling operation of certain.

Two, blow molding: the stage is to have a good pre heated bottle embryo placed into the mold has been done, the high pressure on the inside of the bottle, the bottle blowing into the bottle

   The above content is related to information sharing transparent plastic cans, if necessary, welcome your calls! If you want to know more information, you can continue to pay attention to our official website!